How To Set Up Airbag Suspension

Air ride suspensions are incredibly various break systems that are chosen for many different vehicles. Trucks and SUVs that haul heavy loads often use variable air ride struts to help rest the load and maintain the correct ride height when weighed down. Air ride suspensions are also used in custom cars that are looking to lower the vehicle at will merely still maintain a normal ride height. They tin even be used in the average auto to give it a softer ride.

All types of air suspensions are fairly similar even with the wide range of vehicles they are used in. These air systems usually contain a height sensor, an air bag and air strut, a compressor, and air lines.

This commodity will cover the installation of the type of air ride arrangement that is most often used.

Part 1 of 2: Removing the onetime components

Materials Needed

• Bones tool set
• Sockets and ratchet
• Air ride suspension kit
• Eye protection
• Jack

• Jack stands

• Warning: Air ride systems use high pressure level air. E'er vesture the proper centre protection and protective gear when working with air ride systems.

Step 1: Fix the vehicle. Wearing heart protection, use the jack to lift the vehicle and secure it on jack stands. Then remove the tires.

Step 2: Remove the coil spring and forepart struts. Decide whether the air interruption is just going to be in the rear or if the kit is for the front and rear.

If the front end is going to exist addressed, remove the front struts from the vehicle every bit per the kit instructions.

Rear curlicue springs should be removed if rear air springs are going to be installed.

Step 3: Prepare to install the air suspension. If the kit beingness installed uses a compressor, the about common place to install this is in the spare tire well.

Remove the spare tire and any interior panels required to make room for the compressor to sit down in the trunk.

Part ii of 2: Installing the air suspension

Step 1: Install the rear air bound. Install the rear air spring, or rear coil, in identify of the previous spring.

The air spring will support the weight of the vehicle in one case installation is finished.

Step ii: Install the front air struts. The front air struts will exist installed in place of the previous front end air struts.

These will support the weight of the front of the vehicle once the installation is finished.

• Annotation: There are many dissimilar styles and fitments for front air struts depending on make, model, and suspension type.

Stride 3: Install the air compressor and air tank. The air compressor and the air tank are commonly installed into the vehicle's spare tire well.

Each air suspension kit will have specific instructions on where to install these.

• Note: The compressor fills the air tank with compressed air which allows the lowering and raising of the air suspension. The compressor holds various amounts of air, usually 3 to five gallons depending on the vehicle size and weight.

Step 4: Wire the compressor for air and power. The air compressor will need power to operate.

Generally this wiring is routed through a relay and fuse, so to battery power.

Each corner of the vehicle volition demand its own airline that is then run to the compressor. These air lines must exist tucked under the vehicle and then they practise not bend and break when driving. The lines are attached to the compressor and then the air break tin can be controlled.

Stride five: Do a terminal check of the installation and setup. Expect over the installation and make sure all components are tight.

Most air systems will besides need to be cycled a few times and checked for proper operation. Each kit has a slightly different setup and test procedures, so be certain to follow your transmission's specific instructions.

Operate the air pause to confirm that the vehicle attains the proper ride superlative. This may crave some aligning.

Lastly, the air suspension should be checked for whatever leaks before it is driven.

• Alarm: Air interruption systems volition require actress maintenance and repairs as needed. Altering the pause in any style may affect driving characteristics of the vehicle and void any warranty.

Air intermission can be a helpful addition to your vehicle, whether it is to help conduct a load or to improve how a vehicle rides. If at any time during the installation procedure any questions arise, you tin always Ask a Mechanic to recieve quick, detailed advice. If you do not feel entirely comfortable working on this yourself, qualified technicians at YourMechanic can aid you with whatever repairs, replacements, or other services concerning your suspension.

The statements expressed above are only for informational purposes and should exist independently verified. Please see our terms of service for more details

Source: https://www.yourmechanic.com/article/how-to-install-air-ride-suspension-by-spencer-clayton

Share this post