How To Set Up Humminbird Helix 10

You lot had your eye on information technology for a while, saved up some money and now its time. You got your new Humminbird Helix for ice angling! Going through the settings can get a footling confusing, so hopefully, afterward reading this y'all'll have a little better understanding and accept your Helix set up for water ice line-fishing.

The outset matter y'all wanna do when you fire up for the first time is to make certain you lot are in ICE FISHING MODE. For that just hitting Menu two times, on the left side move over to SONAR. Scroll down to the bottom and find where information technology will either say "Water ice Line-fishing" or "Open WATER". You want this to say "Open WATER" (kinda disruptive I know). If it says "ICE Fishing" there will be a footling arrow pointing left, striking your left button. A Confirm screen will pop up saying the unit of measurement will restart. Striking Yes.

Later your Humminbird Helix is in ice angling mode, you'll desire to make a few adjustments. Most of these can be made at dwelling house, you lot will want to fine-tune once your out on the ice.

HUMMINBIRD HELIX GAIN SETUP

For this, striking your View button until y'all merely take your "flasher mode" all these settings will conduct over to your other views.

Hit Menu in one case. The top setting is Gain. Your gain adjusts your "sensitivity" for smaller profile jigs you may need to increase your gain to become a stronger return. For bigger profile jigs, you can decrease your gain. This will need to be adjusted while on the water.  This is really no different than traditional fish finders for water ice angling.

CHIRP IR

If you are fishing near other ice units you may need to adjust your IR (interference rejection) Settings i,3 and 5 are going to exist your narrower cone. two,4, and six will be your wider cone.

The narrow cone bending is better if you're fix up on a drib-off or line-fishing deep.

The wider cone bending is amend if you're fix on a apartment bottom or line-fishing shallow.

LOWER RANGE

This is a feature that I feel people don't accept full advantage of. Let's say y'all're fishing in eighteen feet of water, set your "Lower Range" to 20ft. This will assist you get the virtually usage out of your dial. This puts 20′ at the acme and allows for the whole punch used. I always ready mine 2-3 anxiety deeper than what depth I'm fishing in.

If you set your "Lower Range" to Motorcar equally your transducers move or swings around information technology will cause your lesser to bounciness around.

SURFACE CLUTTER

I don't mess around with this a whole lot. I will typically run mine on either setting five or 6. It seems to be right to go on the screen make clean and however allowing your smaller jigs to show upward without cranking your gain up.

FLASHER STYLE

This is a personal preference. There are 2 options for this either "Full" or "A Scope". Full (traditional) will have the bar from either your fish or lure extend to the border of the punch. A scope will turn it into smaller marks and won't expand to the edge of the punch. The A-scope is the setting I run and here's why. With the smaller marking of my jig, it'due south a lot easier to tell if a fish is all the same on my lure or it has moved off. If your jig is taking up the whole width of the dial there is a good chance there is even so a fish on you.

SONAR COLORS

This again is a personal preference. I run mine on number 8, but in that location are 22 options for this and then play around with it and see what you lot like all-time. In that location is anything from traditional flasher colors to some with 8 colors involved. Some people will go for darker colors and some with lighter colors. I find information technology easier to read with the darker colors, especially if I'm out hole hopping.

Next, I'll go over a couple of other settings when using the graph mode. I'd say 98% of the time I'k running the dual-screen.  On one side is the flasher, the other side has the graph.

Hit your view push button until you go to the split-screen. Hit carte i time. On the top of the box, it will permit you to modify between left and right agile pain switch over to the left-paw side to become the options for the graph mode.

HUMMINBIRD HELIX Chart SPEED

For this, I similar to crank the speed all the manner upward. information technology volition assist with any delay and give y'all a real-fourth dimension outcome.

SAVE YOUR Bombardment

I know a lot of people complain that the Humminbird Helix volition burn up your bombardment fast.  An easy fix for this is to turn the brightness downward.  To practice this, simply tap the ability push, and a carte will come that includes the brightness.  Turn it down to your liking, and that volition save a heck of a lot of battery juice.

That is about information technology, you're all set up with your Humminbird Helix for ice line-fishing. I've been running my unit for the concluding couple winters and honey it. Merely like whatsoever other flasher, in that location is a chip of a learning curve to using the unit of measurement but once yous go information technology dialed in and use information technology for a while out on the lake it becomes a very vital piece of equipment. I hope this helped a little on setting up your Helix and getting out on the water ice.

If you lot accept any questions on using or setting upward your Helix, comment below or on our social media pages and we volition gladly aid respond whatever of your questions.

Good luck this winter.

Source: https://reviewyourgear.com/humminbird-helix-ice-fishing/

Share this post